![]() ![]() A tag is then affixed to warn anyone that the machine should remain untouched while repair or maintenance or is ongoing. A lock is then placed upon each device or power source to prevent anyone from turning it on. ![]() To understand it further, a Lockout is set down when the company will undergo repair or maintenance work for a certain machine, or even the whole facility. The United Auto Workers (UAW) conducted a study that presented figures of 20% among fatalities in the workplace from 1973 to 1995 were caused by inadequate adherence to measures of a Lockout Tagout procedure. ![]() Lockout Tagout is designed to warn any personnel who works for a certain company that the machines that are undergoing Lockout/Tagout should not be touched or operated at all. ![]() Lockout Tagout is also designed to prevent any unauthorized release of hazardous energy when such service work is taking place. Lockout Tagout is an industry standard that requires equipment and machinery within an industrial workplace to be shut down properly when maintenance or service work is about to take place. Now for those unfamiliar with this, one of the things you must be wondering is – what is a Lockout Tagout anyway? Another is: how would anyone know if it is in effect? These are the things that will be discussed in this article, as well as how lockout/tagout procedures apply to the bigger picture of electrical safety. Lockout Tagout is one of these procedures necessary to keep people safe from electrical accidents or injuries. As there would be times when repair and maintenance is required for certain machines and equipment, safety precautions are set in order to allow the contractors making the repairs and maintenance to proceed. Whenever outside servicing personnel are to be engaged in activities covered by the lockout/tagout regulation, the employer's on-site lockout or tagout procedures must be followed.When working in the industrial field, knowledge on the operations of light to heavy machinery is often a requirement and with that lockout tagout procedures are a must.Accident prevention signs and tags (or both) must be placed on the controls.Must be de-energized or disconnected from their power source (or other actions taken to effectively prevent inadvertent movement or release of stored energy) if they do not have lockable controls.Must be locked out or positively sealed in the "off" position if they have lockable controls (or are readily adaptable to lockable controls).During Repair Work and Setting-Up Operations, Machines, Equipment /Prime Movers:.Workers must receive thorough training on the safe use and maintenance of these tools, methods or means. If machinery or equipment must move during these operations you must minimize the hazard by providing and requiring the worker to use extension tools (eg., extended swabs, brushes, scrapers) or other methods, or means to protect workers from injury.If necessary, the moveable parts must be mechanically blocked or locked out to prevent inadvertent movement, or release of stored energy.Ī mechanical block to prevent the machine part from falling on employees.Accident prevention signs or tags or both must be placed on the controls of the power source of the machinery or equipment.Machinery or equipment capable of movement must be stopped and power source(s) de-energized or disengaged.During Cleaning, Servicing, Adjusting Operations:. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |